The Sav-lite™ 2x4 LED Fixtures are appropriate for grid ceiling applications. Sav-lite™ troffers can be used in commercial and industrial down lighting as well as general illumination. Sav-lite™ fixtures are reliable, enduring and most efficient with the use of high powered Sav-lite™ LED tubes.

Features

• Huge savings in maintenance costs as Sav-lite™ fixtures practically last forever. The fixtures do not need to be replaced when the tube lights stop working since the tube lights are not integrated into the fixture
• Lower power consumption
• Architecturally pleasing
• Uniform illumination
• Listings: UL
• Limited 5-year warranty
• Installation (Simple retrofit):

1. Install fixture in T-bar ceiling opening
2. From the above ceiling, secure troffer to T-bar by bending built in T-bar clips on all 4 corners of the fixture
3. From the above ceiling, remove the access plate and locate driver supply wires (1 black, 1 white, 1 green/ground, 1 purple (capped), 1 grey (capped))
4. Remove one knockout in access plate and pull driver supply wires through the knockout opening
5. Make electrical connections according to local code. Secure access plate back to the fixture
6. Connections are parallel and not series

When used with Sav-lite™ 4 Foot Frost LED Tubes, the following benefits can be utilized

• Long life (~50,000 Hours)
• Substantial Cost Savings from day 1 for new Savlite™ fixtures and new projects (More than 50% direct energy savings, little to no maintenance costs as compared to CFL and minimized heat generation leads to reduction in air-conditioning bills)
• Eco-Friendly: No mercury, Reduced CO₂ Emissions, Recyclable (please check with local recycling rules)
• More Ergonomic:No flickering and no buzzing
• No RF interference
• Efficient light distribution
• Available in cool white color temperature
• Unlike CFL, frequent on/off cycle does not affect the life of LED
• LED turns on instantly
• No Retrofit needed when used with Sav-lite™ fixtures
• May qualify for various government credits